How to reset an ice maker? Like all other machines, your ice maker might cause problems in performing its function. But before contacting any plumber, you first need to check it by yourself by simply resetting your ice machine.
You can reset your icemaker by pressing the reset button for 2-3 seconds or by turning it OFF from the control board and leaving it for 10 minutes. Later, turn it ON and check whether your ice machine has started its function.
So, resetting an ice maker is not a challenging task. All you have to do is to follow the given steps to reset your ice maker at home without any hassle.
- Adjust the Feeler arm
If your ice maker is not functioning correctly, you might need to check if the feeler arm is in its proper place or not. After the ice cube cycle is completed, the shut-off arm lowers down, indicating the completion of the process.
So, when the cycle again starts, the control arm might not be at its raised position, which can cause a halt in the functioning of your ice machine.
All you have to do is to make sure if the shut-off arm is in its place or not. Moreover, all commercial ice makers like nugget ice makers 2022 and high price icemakers share the same procedure of adjusting the feeler arm.
- Press the reset button
If the shut-off arm of your ice machine is at its correct position and your ice machine is still not making ice, you must press the reset button.
Ice makers have reset buttons at different positions. So, first, find the reset button of your ice maker. If the button is at the bottom of your ice tray, you must put out the ice tray or ice bin, depending upon your ice maker, and press the red button.
Pressing the button will show a blue light with a chime sound, indicating that your ice maker has been reset.
After resetting, wait for a few hours because the icemaker may retake 3-4 hours to make the ice.
.You must be thinking, why my Samsung ice maker is not working? But don’t worry, follow the above steps and find the solution to your problem. Besides this, check the waterline of your ice machine to ensure there is no ice-clogged inside, which is causing problems for your ice maker.
Where to find a reset button on an ice maker?
The reset button is not difficult to find. The location of the button depends upon the position of the ice maker.
The reset button will be behind the ice tray if your ice maker is at the top of the freezer. Just put out the ice tray then you will find the button at the top.
Similarly, if your ice maker is at the bottom of the freezer, You need to put out the ice bucket, and there will be your reset button.
The same principle works for resetting all countertop and undercounter ice makers. You can also read the reviews of top undercounter icemakers to know more about the different locations of the reset button. For your convenience, examples of other brands resetting ice makers are given below.
- Reset Samsung ice maker
If your ice maker is not working properly or causing problems, you need to reset the ice machine. Follow the instructions given below:
- First, carefully remove the ice bucket.
- Find the reset button. Depending on your ice maker, it will be at the side or bottom.
- You will find The word ‘TEST’ or an arrow pointing towards the button.
- Press and hold the TEST button until it gives a chime indicating that your ice maker has been reset.
- Put your ice bucket back, and it will again start making ice.
You can also reset your Samsung refrigerator ice maker by following the above steps.
- Frigidaire Refrigerator Ice maker Reset
Frigidaire ice makers contain an ON and OFF button. Usually, the reset button of the frigidaire is located behind the control panel. Remove the control panel and press the button for 5 seconds. It will turn red. After a few minutes, press the button to turn green, showing that your ice maker is ready to function again.
- Reset a Whirlpool Icemaker
If you want to reset your Whirlpool ice maker, simply follow the steps.
- First, find the reset button, which might be located at the top or bottom of the ice tray.
- Remove the ice bin, and if there is any cover plate, remove it.
- Press and hold the button until the blue light or chime occurs, indicating that your ice maker is successfully reset.
Most of the models of whirlpool ice makers follow the same resetting steps as given above.
Precaution
If your ice maker does not work after resetting, you need to call a technician or customer care service. Do not press the reset button again and again otherwise. It will cause troubleshooting to your ice maker. You can also check the owner’s manual to learn about the functioning of your ice maker.
What if my ice maker does not have a reset button?
If your ice maker does not have a reset button, you don’t need to worry about it. In this case, you can reset your ice maker by unplugging it from the main switchboard for 5-10 minutes. Then, plug in the switch, and the ice maker will turn on and start working again.
Reset an ice maker FAQs
How long does it take to reset an ice maker?
It only takes 2-3 seconds to reset an ice machine. But resetting the refrigerant ice maker might take 5-10 minutes, and then start making ice again.
How to reset an igloo ice maker?
For an igloo ice maker, press the reset button for about 5-10 seconds. The chime sound will indicate the resetting of your ice maker.
Why would an ice maker suddenly stop working?
An ice maker might stop working suddenly due to the improper adjustment of the feeler arm or if the ice is clogged inside the waterline.
But if your problem does not resolve after this, you must contact the manufacturer to sort out your problem.
How to manually reset an ice maker?
You can manually reset an ice maker by unplugging the ice maker from the main board for almost 2-3 minutes. Then again, plug in the switch to turn ON the ice maker. The LED light will indicate that your ice maker is ready to produce ice.
Conclusion
To reset an ice maker is not difficult at all. You don’t need to hire a plumber or call the manufacturer to reset your ice maker.
You can do it yourself by pressing the reset button for about 2-3 seconds which gives a chime sound showing that your ice machine will start functioning again after a few minutes.